Use and Care Manual

(22) #8x1” tek screws
(10) #8x1/2” tek screws
(1) Left Z-Bar
(1) Right Z-Bar
Single Screen Door
Installation Instructions
Single Door Rev 5 (05/16)
(1) Bug Sweep Channel
(1) Bug Sweep Wool Pile
This kit can be used for left or
right hand installations.
Right hand hinge shown.
Package Includes:
(1) PCA Screen Door
(1) Left Hand Z-bar
(1) Right Hand Z-bar
(1) Header Z-bar
(1) Piano Hinge/Side Expander
(1) Piano Hinge/Side Expander
(1) Header Z-Bar
(1) Adjustable Bug Sweep
(Includes Bug Sweep Channel
and Wool Pile)
(22) #8x1” TEK Screws
(10) #8x1/2” TEK Screws
Not Shown:
(1) Door Handle and Closer Kit
Trim
Before You Begin!
1. Are you installing a LEFT HAND or RIGHT HAND door? This kit can be used for left or
right hand installations. These instructions show a RIGHT HAND installation.
2. Do you need to use a FILLER STRIP? If working depth is less than 1” you will need to
install a fi ller strip. Filler strip kit available from PCA Products.
Step 1: Cut Left and Right Z-Bar to length
Facing the house from the outside, measure the height of the opening from the top of the door opening, to
the top of the threshold (Fig 1A). Using that dimension, measure from the Z-bar notch and cut the LEFT
and RIGHT Z-bars to the same length (Fig 1B). Keep this dimension handy as it will be needed later.
Using the opening
dimension, measure
from the Z-bar notch
and cut the LEFT and
RIGHT Z-bars to the
same length
Page 2 Single Door Rev 5 (05/16)
If working depth is less than 1”
a filler strip must be used
PCA Uni-Z Bar shown will accommodate
1” working depth. Filler strip would be
inserted here.
Opening Height = ______”
PCA Screen Door Installation
Fig 1A
Fig 1B
1 2
Are you using this door as part of a
French Door Installation?
Follow the QR code to see Astragal and
French Door Installation Instructions.
www.pcaproducts.com/help