User's Manual

Page 13 of 14
Mounting
The Echo
®
Wireless Vibration Sensor should be stud mounted on a clean, flat surface.
The sensor is sensitive in the axis that passes through the mounting hole in the base of the
unit. It is not recommended to mount the sensor with a magnet or adhesive due to the
size and mass of the sensor.
Outline Drawing
Spot Face Tool
If a clean and flat spot is not available, it is recommended to prepare a flat machined
surface with IMI model 080A127 1” spot face tool. This tool will prepare a flat surface
and drill the appropriate pilot hole for a ¼-28 UNF thread. The tap is not included in the
kit.