User's Manual

Page 8 of 14
The connection window will appear. Select the appropriate COM port to which the cable
is connected.
Reading the Current Programmed Parameters
Click “Link to Echo
®
” and the green light will illuminate indicating the connection has
been made. The fields at the right of the window will populate with the current
programmed parameters.
The Sensor ID is set at the factory and CANNOT be changed. This ID is
unique to each sensor we manufacture. The factory default the
Transmission Interval is 8 hours, RVL is 0 (off), and the CF Report
Threshold is 0.15.
Tip