User's Manual

2-6 Connecting the Accelerometer HVM200 Manual
Sensor information, including
model, serial number, and sensitivity
specifications are usually listed on
the calibration certificate that comes
with an accelerometer.
FIGURE 2-8 Sensor List Identification and
Sensitivity
If you are using an accelerometer
with TEDS capabilities, sensor
information will appear
automatically in this list.
In the Sensor List, type the model, serial number of your
accelerometer, and the sensitivity for the x, y, and z axes and
then click Add.
Select the accelerometer when it appears in the list and click
Select. The sensitivity values will automatically appear on
the Sensor tab. Click Save.
Use the Sensor List to quickly access and select stored
sensors for future measurements.