User's Manual

HVM200 Manual Setting Up the Measurement 3-3
FIGURE 3-2 Select New Setup File
Set Operating Mode, Interval Time, and Weighting
The interval time values represent
the span that data is collected,
averaged, and stored before starting
a new sample. The Slow option is an
exponential detector, meaning that
each 1 second average computation
includes all previous data in the
measurement.
Step 3 On the Setup tab, specify any changes to your
settings and select the Store Raw Data option if
you have the it installed and need it for your post-
measurement analysis. The Store Raw Data option
will greatly increase the amount of memory
required to store the measurement. Click Save.
The supplied HVM200 memory card
can store up to 24 hours of
measurements with the Store Raw
Data option enabled. When not
enabled, the card can store
approximately 8000 hours of
measurements.
The Wh weighting is automatically
specified for all axes with the Hand/
Arm mode. For more information on
operating mode options and
weighting curves, see the "Technical
Specifications" in this manual and
ISO 8041:2005.
FIGURE 3-3 Operation Settings