User's Manual

F30
Key Functions and Technical Index
The key characters/ functions of the phone are listed as below:
1.Suitable for GSM or WCDMA networks
2.Built-in high quality Industrial Module with powerful signals- receiving ability
3.Support Handfree,Caller ID,Redial.
4.Support both SMS .
5. Phone Book which can store 300PCS contact names
6.SIM Card card bar & unbar,networks operator bar & unbar
7.With Intelligent STK.
8.Records history: dialed/received /missed calls
9.With LCD to display the networks provider,date&time,battery status and signals strength.
10.Built-in 15PCS 16 chords music ring tones
11.With Alarmclock and Calendar
12.Built-in powerful backup battery and the standby time is up to 72 hours.
Phone Installation
This phone is a wireless communication device. So it is very important for you to install the phone in a proper
place. To place the antenna in a proper place is a very important for you to get a powerful signal.
1. Choose proper place for the antenna.
You can use your mobile phone to search for the place where the strongest signal is. Then put the antenna
here.
Please do not make the antenna close to the phone. It will disturb the signal of the phone.
Please do not make the antenna and the phone too close to the TV set, computer, radiogram or any other
wireless devices. It will disturb the signal-receiving of the phone.
Please turn off the power in the lightning storm time.
2. Install the SIM Card
1). Press and hold the battery cover switch and open the battery cover.
2). Slide the SIM card into the SIM card slot, making sure that the card corner of the SIM card is
aligned with the card corner of the SIM card holder.
3). Replace the battery cover
Notice:Before you install your SIM card into your wireless phone,make sure that the phone is in
power off status.Or your SIM will be damaged.
3. Install your wireless phone.
1). Please connect the antenna, insert the your SIM card, and install the handset.
2). Insert the power supply and turn the red button for 3 or 5 seconds or press the ON/OFF button at the
back of phone. Then the backlight of the LCD will turn on.