User Guide
02
03
04
05
06
07
01
21
CHARGING YOUR BATTERY
. To charge, open the Charging/Data Jack cover and connect
the Wall Charger. Make sure you align the connector as it
appears in the image.
If the battery connector is not properly aligned, damage could occur to
the charging connector and the phone may not charge.
. Plug the other end into a standard outlet.
. To remove the Wall Charger, squeeze the adapter’s side
buttons (1) and pull the charger from the device (2).
•
When you charge the battery with the handset powered off you will
see a charging status screen. After the charging has completed, the
Charge Complete message appears. You cannot operate the phone
until it is powered on.
•
The battery is not fully charged at the time of purchase. Fully charge the battery before use.
•
It is more efficient to charge the battery with the handset powered off.
•
Battery operating time gradually decreases over time.
•
If the battery fails to perform normally, you may need to replace the battery.
CORRECT INCORRECT
CORRECT INCORRECT