User Guide

66
MY NAME CARD
A Name Card with the handset’s mobile number automatically appears.
EDIT MY NAME CARD
. From idle mode, press the OK Key to unlock the keypad, press the Left Soft Key
[Menu], swivel to the QWERTY keypad, press 2. Contacts then press 5. My Name Card.
. Press the Left Soft Key
[Edit].
. Edit My Name Card options and then press the OK Key [SAVE] to save your changes.
SEND MY NAME CARD
. From idle mode, press the OK Key to unlock the keypad, press the Left Soft Key
[Menu], swivel to the QWERTY keypad, press 2. Contacts then press 5. My Name Card.
. Press the Right Soft Key
[Send].
. Press Via Bluetooth.
• Via Bluetooth: Allows you to send Name Card to another Bluetooth device.
1. Press 1. Add New Device. If the Bluetooth® power is switched off, the following message will appear on the
screen: "Turn Bluetooth power on?". Press the Right Soft Key [Ye s].
2. When "Place device you are connecting to in discoverable mode" appears, press the OK Key to start
searching Bluetooth devices.
3. Press the Directional Key up or down to select a desired device and press the OK Key [PAIR]. Please
refer to page 67 for more details on Bluetooth.
4. The handset may prompt you for the passkey. Consult the Bluetooth® accessory (sold separately)
instructions for the appropriate passkey (typically “0000”—4 zeroes). Enter the passkey, then press the
OK Key.
5. "Before Connecting To [Device Name]" will appear on the screen. Select Always Ask or Always Connect
and press the OK Key.