User Guide

68
ADD NEW DEVICE
Pairing is the process that allows the handset to locate, establish and register a 1-to-1 connection
with the target device.
. From idle mode, press the OK Key to unlock the keypad, press the Left Soft Key
[Menu], swivel to the QWERTY keypad and press 6. Bluetooth, 1. Add New Device.
. If the Bluetooth® power is switched off, the following message will appear on the
LCD screen: “
Turn Bluetooth power on?” Press the Right Soft Key
[Ye s].
. The handset will prompt you with the following message on the LCD screen: “Place
device you are connecting to in discoverable mode” Press the OK Key.
. The device will appear in the ADD NEW DEVICE menu. Select the device you wish to
pair to, then press the OK Key [PAIR].
. The handset may prompt you for the passkey. Consult the Bluetooth® accessory (sold
separately) instructions for the appropriate passkey (typically “0000”—4 zeroes).
Enter the passkey, then press the OK Key.
You do not need to input the passkey for pairing when the passkey of the Bluetooth® Headset or hands-free
kit is 0000.
. The handset will prompt you with the following message on the LCD screen: BEFORE
CONNECTING [Device Name]. If you would like to always confirm before connecting
to the Bluetooth® device, select Always Ask, then press the OK Key. Then the handset
will prompt you with the message Connect to [Device Name]? Press the Right Soft
Key [Yes ]. If you do not wish to confirm every time before connecting to the
Bluetooth® device, select Always Connect, then press the OK Key.
. Once connected, you will see the device listed in the Bluetooth menu and the