Integration Guide

12
INTEGRATION GUIDE
This can be veried by looking at the boot log or issuing the dmesg command and
looking for lines that begin with ath10k_pci. The system needs to have the correct
board data le at that location to pull the correct conguration and initialization
information for the Radio Module to function.
Below is an example of the driver and the PCTEL board data le loading correctly.
root@OpenWrt:/# dmesg | grep ath10k
[ 15.869293] ath10k_pci 0000:05:00.0: enabling device (0140 -> 0142)
[ 15.876075] ath10k_pci 0000:05:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0
reset_mode 0
[ 18.503626] ath10k_pci 0000:05:00.0: qca9888 hw2.0 target 0x01000000 chip_id
0x00000000 sub 0000:0000
[ 18.512911] ath10k_pci 0000:05:00.0: kcong debug 0 debugfs 1 tracing 0 dfs 1
testmode 1
[ 18.530080] ath10k_pci 0000:05:00.0: rmware ver 10.4-3.9.0.2-00070 api 5
features no-p2p,mfp,peer-ow-ctrl,allows-mesh-bcast,no-ps crc32 a44e2231
[ 19.111055] ath10k_pci 0000:05:00.0: board_le api 1 bmi_id N/A crc32 74ac9ec2
[ 21.342454] ath10k_pci 0000:05:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta
512 raw 0 hwcrypto 1