Integration Guide

13
INTEGRATION GUIDE
5.1. Form Factor
The image of the RM-WIFI-AC-2X2-HP-XX radio module shown below identies
the connectors and mounting holes used to integrate the module into other host
systems.
5. Mechanical
mPCIe Connector Mounting hole
Mounting hole
U.FL Antenna vConnector
U.FL Antenna Connector
Figure 2. Radio Module
The board outline and dimensions for the Radio Module conforms to the PCI-SIG
“PCI Express Mini Card Electromechanical Specication, Revision 2.0” and all
superseding specications. The outline conforms to the denition of the “Full Mini
Card”, see Figure 3.
Figure 3. Dimensioned Drawing of the Radio Module
8.25
2.50 10.20
48.05
2X
25.70
2X
50.95
30.00
24.20
47.70
2.60
2X
2.1
1.35
1.0
TOP VIEW
BOTTOM VIEW
DIMENSIONS
SHOWN IN MM.
BOTTOM VIEW
WITH APPROX THERMAL
PAD LOCATION
(WHEN NEEDED)
1/13/2022 5:35 PM Thermal01 260-9285-XXX PHEASANT RUN MECHANICAL DIMS.1.SLDDRW PRELIMINARY RELEASE S. LINDNER
8.25
2.50 10.20
48.05
2X
25.70
2X
50.95
30.00
24.20
47.70
2.60
2X
2.1
1.35
1.0
TOP VIEW
BOTTOM VIEW
DIMENSIONS
SHOWN IN MM.
BOTTOM VIEW
WITH APPROX THERMAL
PAD LOCATION
(WHEN NEEDED)
1/13/2022 5:35 PM Thermal01 260-9285-XXX PHEASANT RUN MECHANICAL DIMS.1.SLDDRW PRELIMINARY RELEASE S. LINDNER
8.25
2.50 10.20
48.05
2X
25.70
2X
50.95
30.00
24.20
47.70
2.60
2X
2.1
1.35
1.0
TOP VIEW
BOTTOM VIEW
DIMENSIONS
SHOWN IN MM.
BOTTOM VIEW
WITH APPROX THERMAL
PAD LOCATION
(WHEN NEEDED)
1/13/2022 5:35 PM Thermal01 260-9285-XXX PHEASANT RUN MECHANICAL DIMS.1.SLDDRW PRELIMINARY RELEASE S. LINDNER