Integration Guide

14
INTEGRATION GUIDE
5.2 Mechanical Implementation
In order to deploy the RM-WIF-AC-2X2-HP-XX Radio Module in environments that
will experience temperatures above 75 °C ambient, PCTEL requires that a properly
sized thermal pad be installed between the bottom of the radio module and the
host PCB. The thermal pad should cover most of the bottom of the Radio Module
and be of appropriate thickness to ll in the gap between the Radio Module PCB
and the host PCB as shown in Figure 4 and Figure 5 below.
Figure 5. Bottom View of the Radio Module Showing Thermal Pad Coverage
8.25
2.50 10.20
48.05
2X
25.70
2X
50.95
30.00
24.20
47.70
2.60
2X
2.1
1.35
1.0
TOP VIEW
BOTTOM VIEW
DIMENSIONS
SHOWN IN MM.
BOTTOM VIEW
WITH APPROX THERMAL
PAD LOCATION
(WHEN NEEDED)
1/13/2022 5:35 PM Thermal01 260-9285-XXX PHEASANT RUN MECHANICAL DIMS.1.SLDDRW PRELIMINARY RELEASE S. LINDNER
8.25
2.50 10.20
48.05
2X
25.70
2X
50.95
30.00
24.20
47.70
2.60
2X
2.1
1.35
1.0
TOP VIEW
BOTTOM VIEW
DIMENSIONS
SHOWN IN MM.
BOTTOM VIEW
WITH APPROX THERMAL
PAD LOCATION
(WHEN NEEDED)
1/13/2022 5:35 PM Thermal01 260-9285-XXX PHEASANT RUN MECHANICAL DIMS.1.SLDDRW PRELIMINARY RELEASE S. LINDNER
Figure 4. Typical Mounting Congurations Showing Installation of Thermal Pad