User's Manual

Communication
Systems Inc.
PDI-P26/P32/P40LCDE
Quick Start Guide
Page 10 of 12
Better Solutions Are Within Reach™
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH [phone] PH [phone]
Document Number: PD196I190R1.DOC
Cloning
Cloning allows quick programming of a TV using a USB Flash Drive. First a specimen TV is hand-programmed using a
programming remote control (PD108-420) with channels, sound, and other settings. While the TV is On a USB Flash Disk is
inserted into that TV’s Clone port, the specimen TV’s setup written to the Flash Disk, and then the Flash Disk is removed to program
other televisions. One Flash Disk can be used to program an entire hospital of televisions.
Save Setting to USB Disk
1. Turn the TV On.
2. Press SETUP on the remote control.
3. Press CH▲ or CH▼ to highlight Cloning.
4. Press VOL► to enter the Cloning menu.
5.
A Message Prompt appears indicating 15 seconds required to enter Clone mode. Insert a Flash Drive (user provided) into the
USB Clone Port located adjacent the Cable TV Jack.
6. Press CH▲ to initiate Clone mode.
7. When the Cloning Main Menu appears, Press CH▲ or CH▼ to highlight Save Setting to USB Disk.
8.
When the Save Settings to USB menu appears, press CH▲ or CH▼ to highlight the appropriate model.
9. Press VOL► to initiate.