User's Manual

Communication
Systems Inc.
PDI-P26/P32/P40LCDE
Quick Start Guide
Page 9 of 12
Better Solutions Are Within Reach™
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH [phone] PH [phone]
Document Number: PD196I190R1.DOC
Internal Speaker Enabled
The speakers inside the TV’s cabinet normally are enabled. Sound is also routed externally to an attached pillow speaker.
1. Enter the Sound menu
2. Press CH▲ or CH▼ to highlight the component you want to change.
3. Press VOL◄ or VOL► to select Enabled or Disabled.
4. Press SETUP to return to the previous menu.
Minimum Volume
This sets the minimum volume level the TV can reach. For pillow speakers with an adjustment thumbwheel volume control, ALWAYS
set a minimum volume level for the
TV. A minimum volume setting is usually not required for pillow speakers with dedicated Volume
Up and Down buttons.
NOTE: Setting this level to any value other than 0 guarantees that some level of sound will always be heard when
the
TV is operating.
1. In
the Sound menu, press CH▲ or CH▼ to highlight Minimum Volume .
2. Press VOL◄ or VOL► to select the preferred minimum volume.
3. Press the SETUP button to return to the preceding menu.
Power on Volume
This sets the initial volume the TV starts at upon powering on. Once the TV is on, the volume can be set to any allowable level.
In
Sound menu, press CH▲ or CH▼ to highlight Power on Volume.
1. Press
VOL◄ or VOL► to select the preferred volume when the TV turns on.
NOTE : Setting the level to LAST causes the TV to remember the last volume level used by the TV prior to turning off.
2. Press the
SETUP button to return to the preceding menu.