User's Manual

2.1. Installing the Client Software
1.Download the client software from www.pdwgroup.com. It can be
found in the TPMS section of the website. It is also available in the
CD-ROM.
2.Double-click the setup.exe le to install the client software.
3.Select the language to be displayed during installation. The display
language is irrelevant to the product language.
4.Install the client software by selecting the default options. Click Finish
when installation is complete.
2.2. Activating and Reading Sensor Information
You can activate and read sensors, including third-party sensors. The
following information can be read: sensor ID, barometric pressure,
temperature, and quantity of electricity.
Procedure:
1.Connect the programmer to the PC properly.
2.Double-click the client software to start it.
3.Click Brand in the upper-left corner to go to the brand selection page.
4.Select a brand such as BMW and go to the vehicle series and model
Note: Before using the product, ensure that the client software has been
installed on the PC and the device is connected to the PC by a USB
cable. The USB connection icon is green during normal connection.
Note: When reading, writing, and activating a sensor, ensure that the
sensor is no more than 10cm from the product.
II. Basic Functions
4