User's Manual

2.3.2. Programming Multiple Sensors

The programmer supports simultaneous programming of up to ve

sensors. The procedure is as follows:

1.Connect the programmer to the PC properly. Double-click the client

software to start it.

2.Click Brand in the upper-left corner to go to the brand selection page.

Select a brand, vehicle series and model and year, and go to the

activation and programming page.

Select Multisensor..

4.Place general-purpose programmable sensors of PDW Technology

(up to ve sensors) on the programmer. Ensure that no other sensors

exist within a range 50 cm from the programmer and that the sensors to

be programmed are no more than 10 cm from the programmer.