User's Manual

Notice
* Do not watch the device when driving.
* This product is for passenger cars only.
* Some window tint lm & radar detector may affect TPMS signal
transmission.
* Ensure to read through the user manual completely and fully
understand the contents before use.
* It is recommended that a tyre professional install this product.
* This product is an effective tool to continuously monitor the tyre
ination point; this unit may not be effective during sudden deation
or accidents.
* Do not use in conjunction with tyre foam lling products.
* The monitor does not require constant observation. When there is
abnormal tyre pressure or temperature, the display will automatically
alarm with both a visual and audio cue.
* Ensure that the in car display does not distract while driving.
* This manual covers internal and external sensors.
This product includes four sensors and one in-car display. The
sensor will detect the tyre pressure and temperature. Continuously
transmitting the tyre pressure and temperature data, in wireless
mode to the in-car display. When abnormal activity is detected, an
alarm will be activated to alert the driver of the issue (both by an
audio and visual alert).
TPMS Brief Introduction
The system will automatically jump to the next sensor position. The
order of sensor set up is FL—FR—RR—RL
g. When all tyres are set up, the display will stop at the rear left
position and show its ID. Click “ ” button to exit the setup
procedure.
Note: During every step you can click the button to cancel the
current operation.