User's Manual

External Sensor Battery Replacement Step
a
b
c
d
e f
g
h
1. Remove the metallic cover with the spanner provided.
2. Remove the old battery.
3. Install the new CR1632 battery.
4. Replace the outside cover
2
2.2Internal Sensor Install (This step should only
be done by a tyre professional)
a. Remove the tyre from the wheel.
b. Remove the old valve from the wheel.
c. Ensure the valve hole area is clean.
d. Install the internal sensor
e. Lock the screw of the sensor on the outside of the wheel.
f. Product should be as tted shown.
g. Replace tyre, check for leakage and balance the wheel.
h. Reinstall on car.