Instruction Manual

• Coaxial Digital Input: Connect the coaxial output from any digital source, using
a coaxial digital cable. Push the “COAX” input button on the front of the DAC•iT
to listen.
• Optical Digital Input (sometimes called Toslink): Connect the optical output
from any digital source, using an optical digital cable. Push the “OPT” input button
on the front of the DAC•iT to listen.
• USB Digital Input: Connect the USB output from a computer (or other source
component which can output audio via USB) using a USB cable. Push the “USB”
input button on the front of the DAC•iT to listen.
• Line Output: Connect the DAC•iT’s left and right line out jacks to line-level
(AUX) inputs on your preamplifier, integrated amplifier or receiver. Select any
connected digital source from the front panel of the DAC•iT or from the DAC•iT
remote control. Set your listening level using your existing system’s volume
control.
WARNING: DO NOT CONNECT THIS FIXED-LEVEL LINE OUTPUT TO A
PHONO INPUT OR DIRECTLY TO THE INPUTS OF A POWER AMPLIFIER.
YOU WILL LIKELY DAMAGE YOUR PREAMPLIFIER, RECEIVER, POWER
AMPLIFIER AND SPEAKERS!
Connections
6