Grand Integrated X1
Safety Guidelines Important Safety Instructions 1) Read these instructions – All the safety and operating instructions should be read before this product is operated. 2) Keep these instructions – The safety and operating instructions should be retained for future reference. 3) Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4) Follow all instructions.
IMPORTANT SAFETY INSTRU Safety Guidelines CAUTION The lighting flash with arrowh triangle, is intended to alert us “dangerous voltage” within th be of sufficient magnitude to c CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within to alert the user to the pre and maintenance (servicin accompanying the appliance.
Grand Integrated X1 Introduction Back Panel Front Panel Connections Grand IntegratedX1 Remote Control PHASE USB COAX1 COAX2 OPT1 OPT2 BNC AUX1/HT AUX2 Useful Tips and more...
At Peachtree Audio we design products to provide a profound listening experience. When you connect the digital output from a Sonos Connect or an Apple TV you’ll realize the full benefit of the sound these products are capable of providing.
2 1 OFF POWER ON 230V AC INPUT 120V AC~50/60Hz VOLTAGE SELECTOR 14 Back Panel 3 OUT TRIGGER IN Max Power Consumption Fuse Rating: 115V Input-T15AL250V 230V Input-T7.
1) AC Power Cord Attachment & Fuse: The three prong power cord is included in the Grand Integratedx1 box. The fuse is replaceable after turning the Grand Integrated x1 off. You may call your dealer or Peachtree Audio’s service department with any questions regarding fuse replacement. **warning ** using the wrong value fuse may cause damage to the Grand Integratedx1. 2) Power On/Off Switch 3) 12V Trigger: Enables automatic turn on and off from-or-to another product with the same feature.
1 COAX1 3 COAX2 4 OPT1 5 OPT2 6 BNC 7 AUX1/HT 8 AUX2 PHASE 9 10 11 12 Grand IntegratedX1 13 14 *To dim the front panel lights simply hold down the active input button for a few seconds until the front panel lights dim.
1) Standby Switch: After turning the Grand Integratedx1 on from the back panel (#2 Power On/Off switch) you can use this button to switch between “ON” which displays a blue light and “Standby” which displays a green light. This function can also be controlled by the wireless remote control. 2) USB Digital Input: The USB connection accepts digital audio content from your computer and sends it to the internal DAC.
Connections COAX Digital Input: For connecting the coaxial output from any digital source, using a coaxial digital cable. Push the “COAX” input button on the front of the Grand Integratedx1 to listen. OPT Digital Input (sometimes called Toslink): For connecting the optical output from any digital source, using an optical digital cable. Push the “OPT” input button on the front of the Grand Integratedx1 to listen.
MUTE 8 1 UP 2 VOLUME PHASE 3 DOWN Remote STANDBY TUBE 9 4 USB COAX1 COAX2 OPT1 5 6 10 OPT2 BNC AUX1/HT AUX2 7 11 12 1) On/Standby: Puts the Grand Integratedx1 in or out of “Standby”. 2) VOL - / VOL +: Reduce or increase volume level. 3) Phase Switch: When engaged, the Grand Integratedx1 will operate 180 degrees out of phase. An led will appear on the front panel. When it is not engaged, led off, the Grand Integratedx1 is in phase. See front panel description for more information.
Useful Tips and more... At Peachtree Audio we try to design with ease of operation in mind. However, If you own a PC and want to stream at high resolutions like 24/192, you’ll need to download the driver on the enclosed CD ROM first. Complete USB setup instructions are outlined below. if you are a Mac owner, congratulations! Apple computers meet USB 2.0 spec and do not need a driver for high resolution USB playback.
The Grand Integratedx1 turns on but there is no sound. Be sure your system is not muted and that the Grand Integratedx1 has been selected. Be sure your digital source is on and playing. Be sure the Grand Integratedx1’s standby button is glowing blue and that your desired input button is glowing blue. If the input button is blinking the Grand Integratedx1 is in “mute” mode. Press the mute button on the remote to un-mute the Grand Integrated x1 . Check to be sure your digital cable is properly connected.
Product Warranty and Ser vice International Warranty and Claims Under Warranty International Warranty The Grand Integratedx1 has a three year Parts and Labor warranty from the time of purchase. The tubes (valves) have a 6 month warranty. Units that are covered under this warranty include Grand Integratedx1s purchased from an authorized Peachtree Audio distributor or dealer.
• Variable RCA stereo output: 8V rms / 11.2V peak • Line level output impedance: 448 ohms • Single ended RCA preamp output impedance: 448 ohms • S/N at the fixed analog output: 107db • S/N at the variable analog output: 104db • Jitter measured at the master clock: < 3.0ps • Power supply: 69,000uf of filtering Te c h n i c a l S p e c i f i c a t i o n s • Fixed line-level RCA stereo output: 2V rms • Volume control: Dual Mono adjustable gain volume control with 0.
Grand Integrated X1