Assembly

Bedskirt diagram
An easy step-by-step process to apply and secure your Peacock Alley bedskirt.
Peacock Alley has developed a better way to install the perfect bedskirt. We manufacture our bedskirts in 3
panels. This makes the bedskirt easier to secure and set into place how you want it.
This package contains:
Three (3) separate bedskirt panels (Right Side Panel, Left Side Panel, Foot Panel)
and 8-L Shaped pins to secure panels
Any questions?
Please contact [e-mail]
www.peacockalley.com
A B C
Press the bedskirt if necessary.
1
Begin with the shortest bedskirt panel at the
foot of the bed. Ax the end of the panel to
the corner edge of the box spring using the
enclosed pins. (Note to match the corner
accurately for the cleanest look. Image A)
3
Remove the mattress to fully expose your
box spring.
2
4
Continue to attach the bedskirt to the box
spring using pins every 12 inches. Place
pins as far from the edge of the box spring
as possible to avoid interference from your
tted sheet. (Note if the panel is longer that
the width of the box spring, fold under the
extra length and fasten with a pin.)
5
Next apply the rst side panel. Begin at the
same corner where you began with your
foot panel. Match the length to the oor
and the corner. Start at the foot of the bed
and work towards the head securing pins.
(Image B)
6
Repeat this same procedure with the third
side panel, beginning at the foot of the bed
and working towards the head. (Image C)
7
Finally, check the pins to ensure they are
secure before lowering your mattress.
n