Installation Guide

IMPORTANT INFORMATION
No representation or warranty is given that
your particular application of these products complies with
relevant building codes or that the fasteners provided or
used are appropriate for your application. Consult with
professionals and local building officials before beginning
work: (i) to ensure compliance with relevant building codes
for your application and for your proposed use of fasteners;
(ii) to ensure the integrity of the structural components in
connection with which these products are to be used; (iii) to
identify appropriate safety gear that is to be used during
installation such as a safety harness when working above
ground; (iv) to ensure that the work area is free from
utilities, services and hazards; and (v) to clarify any
instructions or warnings that may not be clear. Work in a
safe manner wearing protective gear such as gloves,
eyewear, headwear, footwear and clothing. When using
tools comply with operation manuals and instructions. Metal
and glass may have sharp edges and could fragment or
splinter during or as a result of handling or cutting. Do not
use these products in connection with any substance that is
or may be harmful or corrosive to the products. Inspect and
maintain these products and the structural components that
they are used in connection with on a regular basis, using
professionals when appropriate.
No member of The Peak Group of Companies (as defined at
www.peakproducts.com) shall be liable for any loss or
damage resulting from the improper installation or use of
this product. In the unlikely event that any member of The
Peak Group of Companies becomes liable for any loss or
damage, the aggregate liability shall be limited to the retail
purchase price of the product.
Peak products and associated materials are protected by
patents, designs, copyrights and/or trademarks used under
license from Peak Innovations Inc.
P.O. Box 96060, Richmond
BC, Canada V7A 5J4.
WARNING
Maximum post spacing: 6’
To prevent wood splitting and rot, drill 5/32" pilot holes
and coat lag bolt threads with non-corrosive exterior
silicone caulking. Ensure that the posts are plumb.
Ensure that the spacing between each of the following
is less than 4”:
· pickets
· pickets and post
· pickets and wall
Railings can be attached
to a wall using wall
mount brackets.
Used for horizontal angle
applications
Wall Mount Brackets
Universal Connectors Stair Connectors
2
3/8
"
42
1/8
"
* Glass panels cannot be used on stair applications.
Stair pickets must be used on stair applications.
Dear Customer,
We’d like to take a moment to say “thank you and
congratulations” for choosing our products.
At Peak™ your satisfaction is very important to us.
That is why we work very hard to provide you with
products of exceptional quality, value, and beauty.
And that is also why we want to hear from you.
Please contact us with your comments or
suggestions at: [e-mail]
Or if you prefer, write to us at:
“Customer Care”
The Peak Group of Companies
P.O. Box 96060
Richmond, B.C. Canada V7A 5J4
Finally, we’d like to remind you to always work safely.
Then, take pride, relax with your family and
experience years of enjoyment with Peak™ products.
The Peak Group of Companies
2
3
· glass panels
· glass panel and post
· glass panel and wall
Used for
Stair applications*