Instructions / Assembly

ManualsBrandsPEAK ManualsFencingAquatine 2 in. x 2 in. x 5.93 ft. Black Aluminum Soft Surface Pool Fence Post

Tools & materials required for each application

Fasteners included by Fence Component

Fencing

LUMINUM

Installation Guide

U.S. VersionU.S. Version

Concrete anchor

Concrete screw

• Mitre saw with a non-ferrous

metal cutting blade

• Drill

• Phillips #2 & #3 bits

• Phillips #2 screwdriver

• Socket or wrench set

• Measuring tape

• Pencil

All Applications

Rail & Picket Kit

Hard Surface Post Yard Gate

Pool Gate

Soft Surfaces

• Post hole digger

• Shovel

• Concrete mixing equipment

• Concrete trowel

• Dry premixed concrete (per post):

Hard Surfaces

• Hammer drill

• Masonry bits:

7/32", 5/16"

• Hammer

5/8" Self-drilling screw

½" Self-drilling screw & washer

" Self-drilling screw

Hinge bolt

5/8

" Self-tapping screw

Climate with frost heave - 200 lb.*

Climate without frost heave - 100 lb.*

*Quantities are estimated. Always check your

local codes for post hole size and depth.

Summary of content (7 pages)

PAGE 1
A L U M I N U M Fencing Installation Guide U.S. Version Tools & materials required for each application All Applications Soft Surfaces Hard Surfaces • Mitre saw with a non-ferrous metal cutting blade • Post hole digger • Shovel • Concrete mixing equipment • Concrete trowel • Dry premixed concrete (per post): • Hammer drill • Drill • Phillips #2 & #3 bits • Phillips #2 screwdriver • Masonry bits: 7/32", 5/16" • Hammer • Socket or wrench set Climate with frost heave - 200 lb.
PAGE 2
Dear Customer, We’d like to take a moment to say “thank you and congratulations” for choosing our products. At Peak® your satisfaction is very important to us. That is why we work very hard to provide you with products of exceptional quality, value, and beauty. And that is also why we want to hear from you. Please contact us with your comments or suggestions at: quality@peakproducts.com Or if you prefer, write to us at: “Customer Care” The Peak Group of Companies P.O. Box 96060 Richmond, B.C.
PAGE 3
PICKET FENCE INSTALLATION (soft surface) 4 A 4' H fence 5' H fence A: Install all remaining pickets and fasten the pickets to the rails using 1/2" self-drilling screws and washers (provided). B: Snap a cap over each screw head. This symbol indicates important information 1 First post Second post B Measure and mark the position of all posts and ensure they are aligned. Dig the post holes. ! Always check your local codes for post hole size and depth.
PAGE 4
PICKET FENCE INSTALLATION (hard surface) ! 1 5 rail length This symbol indicates important information A If required, cut the rails to fit between the brackets. rail length ! If you plan to cut the rails before Measure and mark the position of all posts and ensure they are aligned. Put the first post in position. B assembling the fence panel, ensure the rails are correctly oriented before cutting. ! Maximum post spacing: 6' 2 ¼" on center.
PAGE 5
POOL GATE INSTALLATION 4 B A A: Position the latch at the required height on the fence post and then mark the location of both latch brackets (maximize distance between brackets).
PAGE 6
YARD GATE INSTALLATION WARNING 3A Do not use for pool or spa applications. 1 B A 42" The opening between the fence posts must be 42". For Aquatine™ fence posts: Use 1" self-drilling screws (provided) for these steps: A: Align the bottom of the gate with the bottom of the fence, then fasten each U-bracket to the fence post.
PAGE 7
Notes