Instructions / Assembly

37 ¼" - 38 ¼"
POOL GATE INSTALLATION
1
IMPORTANT: Always understand and comply with your local building codes for
access gate requirements:
• Height, clearances, and openings
• Distance between the tops of horizontal members
• Location of the self-latching device above grade
• Swing direction from the pool or spa
• Self-closing
• Other specified requirements
6
A
B
C
A
C
B
2
35 ½"
min.
A
3
A
BB
5
A
B
C
¾"
B
4
The opening between the fence
posts must be 37¼" - 38¼".
Use 1" self-drilling screws for these steps:
A: Fasten the hinges to the front of the gate.
B: Open the hinge and fasten the side legs of
the hinge to the side of the gate.
Space hinges at least 35½" apart
!
The gate must be self-closing from any position.
!
A: Adjust the vertical position of the latch until
the marks line up on the latch and striker.
B: Use a Phillips #2 screwdriver to install the
self-tapping screw (provided) through the notch
most closely centered over a hole in the bracket.
C: Adjust the horizontal position of the striker by
using a screwdriver to turn the #2 Phillips screw
until the marks line up on the striker and latch.
A: Position the latch at the
required height on the fence
post and then mark the location
of both latch brackets (maximize
distance between brackets).
B: Remove the latch, and fasten
both latch brackets with 1"
self-drilling screws (provided).
C: Slide the latch down onto
the tracks of the latch brackets.
Follow local codes for location
of the self-latching device
above grade.
!
Use 1" self drilling screws for these steps:
A: Align the bottom of the gate with the bottom of the fence.
The gap between the hinge side of the gate and the fence post
must be 3/4". Fasten both hinges to the front of the fence post.
B: With the gate open, fasten both hinges to the side of the
fence post.
Follow local codes for swing direction.
!
A: Position the striker with the bottom of the latch and mark the location
of the mounting holes on the gate.
B: Fasten the striker to the gate with 1" self-drilling screws (provided).
C: Snap the cover onto the front of the striker.