Specification

PEAK® ALUMINUM FENCING AQUATINE™
Review for compliance with
2018 International Swimming Pool and Spa Code
June 19, 2020 RJC No. VAN.106169.0029
page 3
Verdict Clause Description Comment
N/A 305.5
Onground residential pool structure as a
barrier
N/A 305.6 Natural barriers
N/A 305.7 Natural topography
This review is based on information and drawings provided by Peak Products USA Corporation for the
elements listed above.
3.0 CONCLUSION
The Peak® Aluminum Fencing Aquatine™ system meets the requirements within Section 305 “Barrier
Requirements” of the 2018 International Swimming Pool and Spa Code®. Limitations of compliance
are defined in the assembly drawings presented in Appendix A.
Yours truly,
READ JONES CHRISTOFFERSEN LTD.
Reviewed by:
Leonard Pianalto, M.Sc., P.Eng., LEED® AP, FEC.
Principal
Stephan Kordt, SE, PE
Kordt Engineering Group, President
LPi/akb
LIMITS OF COMMISSION
RJC prepared this report for the use of Peak Products Manufacturing Inc. The material in it reflects RJC’s judgement in light of information
available to RJC at the time of preparation, including but not limited to material data sheets, independent testing, and physical mock-ups. Any use
that a third party makes of this report, or any reliance or decisions to be based on it, is the responsibility of such third parties. RJC accepts no
responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report.
This report was prepared for Peak Products Manufacturing Inc. It is not for the use or benefit of, nor may it be relied upon, by any other person or
entity, without written permission of Read Jones Christoffersen Ltd.
Digitally signed by
Stephan Kordt, PE, SE
DN: cn=Stephan
Kordt, PE, SE,
o=Kordt Engineering
Group, LLC, ou,
email=SKordt@KordtE
G.com, c=US
Date: 2020.06.19
15:04:19 -07'00'