Instructions / Assembly

The opening between the
fence posts must be 42".
Install each hinge and U-bracket assembly on the gate
and secure with bolt, bushings and nut (provided).
For wooden posts only: Do not use the U-bracket.
For Aquatine™ fence posts:
Use 1" self-drilling screws (provided) for these steps:
A: Align the bottom of the gate with the bottom of the
fence, then fasten each U-bracket to the fence post.
B: Install the top screw on each hinge
C: Install the bottom screw on each hinge by releasing
the bolt (do not completely remove)
For wooden posts:
Secure each hinge to the fence post (fasteners not provided).
Do not use for pool or spa applications.
YARD GATE INSTALLATION
1
2
3A
3B
4
42"
WARNING
Unassembled
U-bracket
Assembled
A
B
C
Use 1" self-drilling screws (provided) for these steps:
A: Secure the retainer to the gate at the marked position.
B: Insert the latch through the retainer.
C: Secure the latch to the gate at the marked position.
D: Check and mark the position for the latch plate on the fence post.
Secure the latch plate to the fence post.
A
C
B
D