The Strength Platform by Peak Fitness Product Manual
Product Introduction Packing List Strength Platform Waist Band Display Screen Control Panel Connecting Buckle Universal Wheel Speaker Folding Handle Folding Switch Pole Bracket Power Socket Handle AC Power Cord Ankle Band Wireless Switch Connecting Buckle Power Switch 1 2
Safety Precautions Thank you for choosing the Power Station. The correct use of the product is the guarantee of safe exercise. To protect the personal safety of you and your family during exercise, please read this manual carefully before using the power station, and strictly follow the precautions in the instructions when using. ◆ User-related 1. Please wear appropriate sports shoes and clothes to use this equipment, and perform appropriate warm-up exercises first. 2.
16. The power plug must be grounded reliably, and try to avoid using other electrical appliances on the same power supply line. Please do not use the power cord or plug that is damaged or stuck with water. The power cord of the power station is dedicated. If it is damaged, it must be replaced by the manufacturer, service center or personnel with relevant professional qualifications to avoid injury. 17.
Control Instructions ◆ Resistance adjustment ★ Standard Mode The standard mode means that the resistance of pulling up and returning is the same. For example, if you choose 10KG, the resistances of centripetal and eccentric movement are both 10KG. A. In the power station control panel, you can perform resistance adjustment, mode switching, and start/stop operations. ★ Eccentric Mode · Eccentric mode means more resistance when putting back and less resistance when pulling up.
★ Isokinetic Mode ·In the isokinetic mode, the resistance will change dynamically with the force you exert. When the device feels that you are exerting a lot of force, it will increase the resistance to ensure that the speed at which you pull is as close to a constant speed as possible, so that muscles are fully stimulated throughout. ·We provide different speed levels of 0.1-1.0m/s to meet your different resistance and speed requirements.
General Usability FCC warning 1. The universal wheels are for indoor flat ground and short distance only. Please don't move it to outdoor or long distances, otherwise it might cause unnecessary damage to the instructions. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.
