Tus neeg siv phau ntawv

USER MANUAL
Charging the adaptor:
1. Insert the charging cable into the TYPE-C USB input port & the
LED indicator will turn on.
2. After charging completed, the LED indicator will fully turn on.
Charging the earbuds:
1. Put the earbuds on the charging adaptor and the LED indicator
will turn on red when it is charging.
2. After charging completed, the LED indicator will turn on blue
Pairing for music/phone call :
1. Turn on the earbuds by long pressing button for about
3 seconds. You will hear a voice from the speaker along with the
blue and red indicator flashing to indicate Power on.
2. Turn on your device and activate the Bluetooth function.
3. Search for Bluetooth name and click to pair, you will
hear a voice from earbuds. Press the button to pause and press
twice to choose for next song. Y
ou just need to press button to
answer the call.
1. Bluetooth connection and transmission may be affected by the
surrounding environment like trees, metal and some other
materials, for they can absorb or block the signal, so the
distance of data transmission may be influenced as well.
2. Fully charge the device while using for the first time,
(when the battery gets lowered, the sound will be
not as good as
the sound in normal case.)
3. Please do not expose the earbuds into the high temperature
environment.
4. In case of low battery, the speaker volume will lower down & you will hear a
warning tone from the speaker indicating low battery.
Specifications:
Adaptor:
Input: 5V 300mA
Output: 5V 300mA
Battery: 3.7V/300mAh
Earbuds
INPUT: 5V 40mA
Battery: 30mAh
ENC TWS EARBUDS AND CASE
“25803”
456582 ITEM: 25803
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG,Inc.and any use of such marks by Dongguan Longjing
Electronic Co.,Ltd is under license.Other tradmarks and trade names are those
of their respective owners.
Manufacturer:Dongguan Longjing Electronic Co.,Ltd.
Bluetooth Listing:D037188
Item Number: 25803
FCC ID 2APYY- AF0072 Made in China
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that
may cause undesired operation
4. Turn off the earbuds by pressing button for around 4 seconds
and you will hear a voice indicating Power off.
Notes: