Instruction Manual

1.1. Safety Symbols
The following symbols are imprinted on the front panel of the meter
to remind you of measurement limitations and safety.
Dangerously high voltage between the inputs.
Extreme caution when measuring. Do not touch
the inputs and measuring tips.
Refer to the complete operating instructions.
To avoid electric shock or instrument damage, do
not connect the common input COM and V/mA/
terminal to any source of more than 600 V with
respect to earth ground.
Double insulation (Protection class II)
CAT III
Overvoltage category III
Earth ground
AC
Alternating current
DC
Direct current
AC or DC (alternating current or direct current)
Diode
Continuity buzzer
M.H
The maximum value is being held
D.H.
This indicates that the display data is being held
AUTO
Auto range
The battery is not sufficient for proper operation
-26-