User Manual

LCD display -010.0V appears. If reference value and

measured value are the same, the digital display shows the

value of "0."

8. Rotary Seletor

This function selector switch is used to switch between the

different measurement functions. To select the desired

measurement function, turn the switch to the appropriate

position.

9. 10A Input Jack

The 10A jack is used for AC and DC currents up to 10A up

with measurement up to 30 seconds (20 A for 10 sec.) once

every 15 minutes. Connect the red lead for current

measurements with this jack. This range is protected by a

10A fuse against overload.

10. V/

/Hz/ / /CAP/TEMP Input Jack

To connect the red test lead for voltage, resistance,

capacitance and frequency measurements, as well as for

the measurement functions diode and continuity tests.

11. mA Input Jack

The mA jack is used for AC and DC currents up to 600mA.

Connect mA current measurements with the red lead to this

terminal. This range is protected by a 600mA fuse against

overload.

12. COM Input Jack

To connect the black test lead (all measurement functions).