User Manual

6.6. Temperature measurements

Warning!

To avoid electric shock, disconnect both test probes from any

source of voltage before making a temperature

measurement.

1. If you wish to measure temperature set the function

switch to the °C-range

2. Insert the temperature-probe

to the input sockets V//Hz

(+) and COM (-)

3. Connect temperature probe

to measurement object.

Keep the connection until the

reading stabilizes (about 30

seconds).

4. Read the temperature in the

display. The digital reading will indicate the proper

decimal point and value.

Warning!

To avoid electric shock, be sure, that the thermocouple has

been removed before changing to another measurement

function.

6.7. Checking diodes

This function lets you check diodes and other semiconductors

for opens and shorts. It also lets you determine the forward

voltage for diodes.

1. Set the rotary selector to the diode position.

2. Press select key until diode symbol is shown