User Manual

CAUTION!
Note on using the supplied safety test leads according the IEC /
EN 61010-031:2008:
Measurements in the field of overvoltage category CAT I or CAT II
can be performed with test leads without sleeves with a maximum of
up to 18mm long, touchable metallic probe, whereas for
measurements in the field of overvoltage category CAT III or CAT IV
test leads with put on sleeves, printed with CAT III and CAT IV must
be used, and therefore the touchable and conductive part of the
probes have only max. 4mm of length.
3. Specifications
Accuracies are: (% of reading + no. of digits) guaranteed for 1 year,
23° C ± 5° C, less than 75 % R.H.
DC Voltage
Range
Accuracy
Resolution
200 mV
± 0.5 % + 2 digit
100 µV
2000 mV
1 mV
20 V
10 mV
200 V
100 mV
600 V
1 V
Input Impedance: > 1 MΩ on all ranges
Overload protection: 600 V DC or peak AC
rms
on all ranges,
in 200 mV range 220 V
rms
AC Voltage
Range
Accuracy
Resolution
200 V
± 1.2 % + 10 digit
100 mV
600 V
1 V
Input Impedance: > 1MΩ on all ranges
Frequency range: 45 Hz to 450 Hz
Overload protection: 600 V DC or AC
rms
in all ranges
Indication: Average (rms of sine wave)
-18-