User Manual

1.1. Safety Symbols
The following symbols are imprinted on the front panel of the meter
to remind you of measurement limitations and safety.
Refer to the complete operating instructions.
To avoid electric shock or instrument damage, do not
connect the common input COM and V/mA/ terminal to
any source of more than 600 V with respect to earth
ground.
Double insulation (Protection class II)
CAT II Overvoltage category II
Earth ground
AC Alternating current
DC Direct current
AC or DC (alternating current or direct current)
Diode
Continuity buzzer
M.H The maximum value is being held
D.H. This indicates that the display data is being held
-25-