User Manual

Direct and alternating current voltage
(DC/AC)
TÜV Rheinland certificated „safety tested“
1.3. Introduction
The two pole voltage tester PeakTech
®
1090 and 1095 with many
other measurement functions.
Emphasize here the single-pole phase test (AC), the polarity of
the DC test-voltage range, the rotational direction signals for 3-
phase systems, the continuity test with visual and audible signal
and the measuring point illumination. The PeakTech
®
1090 also
has a test function for residual current circuit breaker (RCD).
These meters are suitable for AC and DC voltage tests in the
voltage range of 12 V to 690 V, certified TÜV/GS, and were tested
according to EN 61243-3.
Through the dust and splash protection these instruments are
suitable for a variety of applications both indoors and outdoors.
1.4 Features
* Voltage measurements from 12 V - 690 V AC / DC
* Direction of rotation display for 3-phase systems
* Measuring point illumination for safe work
* Continuity test with audio-visual signal
* Polarity check for DC voltage measurements
* Single-pole phase test for AC Voltage
* IP64 dust and splash proof
* TÜV / GS safety tested
* Low impedance test function for residual current circuit
breaker (RCD).
-21-