User Manual

-23-
2. Introduction
The new two-pole voltage tester Peaktech 1096 convinces with its
versatile functions, which makes it possible to use this voltage
tester in many common situations.
The LED and the LCD Voltage Indicator makes it easy to measure
a voltage at a device or a wire. Furthermore, voltage measurements
indicate whether AC or DC voltage is applied to the voltage tester.
The L and R LEDs symbolize the left or right hand rotation of the
phase to be measured (such as in the three-phase current range).
The two-pole voltage tester is also able to perform resistances and
continuity tests. The Hold function allows you to "freeze" any
reading to make it easier to record the readings. With the two
pushbuttons for the low-resistance test, it is possible to check
various wires and devices.
The profile of the Peaktech 1096 is completed with his features
such as the backlight of the LCD screen and the flashlight function,
but also with its modern and ergonomic design.
* Modern two pole voltage tester
* Voltage indicator by LED and LCD display
* Resistance and noise resistance measurement
* Illuminated LCD display
* Integrated flashlight