User Manual

Measurement
Cursor
V and T between cursors
Automatic
Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms,
Overshoot, Preshoot, Freq, Period, Rise Time, Fall
Time, Delay A→B , DelayA→B , +Width, -Width,
+Duty, -Duty
Waveform Math
＋, －, *, / ,FFT
Waveform storage
15 waveforms
Lissajous
figure
Bandwidth
Full bandwidth
Phase
difference
±3 degrees
Frequency ( typical)
1 KHz square wave
Communication
port
USB2.0, USB for file storage, VGA port; LAN
* Single channel is when only one input channel is working.
37.1. Trigger:
Performance Characteristics
Instruction
Trigger level range
Internal
±6 div from the screen center
EXT
±600 mV
EXT/5
±3 V
Trigger level
Accuracy (typical)
Internal
±0.3 div
EXT
±(40 mV + 6 % of Set Value)
EXT/5
±(200 mV +6 % of Set Value)
Trigger displacement
According to Record length and time base
Trigger Holdoff range
100 ns~10 s
50% level setting
(typical)
Input signal frequency ≥50 Hz
Edge trigger
slope
Rising, Falling
Sensitivity
0.3div
Pulse trigger
Trigger condition
Positive pulse : >, <, =
negative pulse : >, <, =
Pulse Width range
30 ns~10 s
Video Trigger
Modulation
Support standard NTSC, PAL and SECAM broadcast
systems
Line number range
1-525 (NTSC) and 1-625 (PAL/SECAM)
Slope Trigger
Trigger condition
Positive pulse : >, <, =
negative pulse : >, <, =
Time setting
24ns~10s
Alternate Trigger
(only P 1305/1310)
Trigger on CH1
Edge, Pulse, Video, Slope
Trigger on CH2
Edge, Pulse, Video, Slope
-166-