User Manual

3.3. Right side panel

Fig. 2 Right side panel

1. USB Host port: It is used to transfer data when external USB equipment connects to the oscilloscope

regarded as “Host equipment”. For example: upgrading software by USB flash disk

needs to use this port.

2. USB Device port: It is used to transfer data when external USB equipment connects to the oscilloscope

regarded as “Device equipment”. For example: to use this port when connect PC to the

oscilloscope by USB.

3. VGA port: To connect the oscilloscope with a monitor or a projector as VGA output.

4. LAN: To integrate this oscilloscope into a network.

-92-