User Manual

131
5. Select Cut in the right menu repeatedly to switch between Screen data
or All data.
6. If the Destination is reference waveform, skip this step. If it is File, you
can select File detail to enter the file explorer. The path and file name
are shown in the Save To: line in the bottom. Select the save location,
see "To select the path or file in file explorer" on P132. In the right menu,
select File format repeatedly to switch between .csv/.bin. If you want to
customize the file name, select Edit file name in the right menu, see "To
edit file names" on P133. Select OK Save in the right menu.
7. Select OK Save in the right menu.
You can also save the waveform data by just pressing the Copy button, see
"To save with Copy button push" on P133.
You can also save the reference waveform to storage in Ref menu, see "To
display/remove reference waveforms" on P131.
To save setup files
Setup information includes acquisition information, such as vertical, horizontal,
trigger, cursor, and measurement information etc. Setup files can be saved to
one of 15 internal locations or to internal/external storage. To save the setup
information:
8. Press the Save button.
9. Select Save in the bottom menu; select Save Setup.
10. Select Destination in the right menu; in the left menu, select one of 15
internal locations, or select File to save to internal/external storage.
11. If the Destination is Set1～Set15, skip this step. If it is File, you can
select File detail to enter the file explorer. The path and file name are
shown in the Save To: line in the bottom. Select the save location, see
"To select the path or file in file explorer" on P132. If you want to
customize the file name, select Edit file name in the right menu, see "To
edit file names" on P133. Select OK Save in the right menu.
12. Select OK Save in the right menu.
You can also save setup files by just pressing the Copy button, see "To save
with Copy button push" on P133.
To display/remove reference waveforms
1. Press the Save button.
2. Select Ref in the bottom menu.
3. For R1～R4, switch to ON, the reference waveform will be displayed;
switch to OFF, the reference waveform will be removed. You can display