User Manual

133
folder or file.
Using touchscreen: You can drag your finger up or down to scroll the file list;
touch the drive letter, folder or file to select. Touch the drive letter or folder
twice quickly to expand or collapse the file list.
Using the G knob: Turn the G knob to select in the file list. When the drive
letter or folder is selected, push the G knob to expand or collapse the file list.
To edit file names
The oscilloscope gives all files it creates a default name in the following format:
 XXXX.set for setup files
 XXXX.png, XXXX.bmp, or XXXX.jpg for image files
 XXXXYYY.csv or XXXXYYY.bin for waveform files
 XXXX.PF for rule files of pass/fail
The XXXX is an integer from 0000 to 9999.
For waveform files, the YYY is the channel of the waveform, and can be one of
the following: CH1, CH2, CH3, or CH4 for the channels; RF1, RF2, RF3, or
RF4 for reference waveforms
When entering the interface of editing name, there will be a keypad dialog that
let you touch to enter names. The length of file name is up to 256 characters.
When you are done entering the file name, touch the dialog's Enter to confirm
and close the keypad dialog.
To save with Copy button push
You can save the image, waveform data or setup file by just pressing the Copy
button. After you have defined the save parameters with the Save menu, you
can save files with a single push of the Copy button. For example, if you have
defined the save operation to save image to external storage, then each push
of the Copy button will save current screen image to the defined external
storage.