User Manual

134
To define the Copy button behavior, follow the steps below.
1. Press the Save button.
2. Select Save to Config in the bottom menu.
3. Select the save type from Screen Image, Waveform and Setup.
4. Select Change folder to define the save path, see "To select the path or
file in file explorer" on P132.
When you push the Copy button, the oscilloscope will perform the action that
you just specified rather than requiring you to enter the Save menu each time.
To manage file
You can create folder, rename or delete a file in File utilities menu.
1. Press the Save button.
2. Select File utilities in the bottom menu.
3. Select path or file in file explorer, see "To select the path or file in file
explorer" on P132.
4. Select Create folder, Rename or Delete in the right menu. See "To edit
file names" on P133.
How to Implement the Auxiliary System Function Settings
● Config
To change the user interface language
1. Press the Utility button, select Config in the left menu.
2. Select Language in the bottom menu; select the desired language in the
right menu.
To set the network parameters
Using the LAN port, the oscilloscope can be connected with a computer
directly, or through the router to connect. The network parameters can be set
in Net Config dialog. Refer to "Using LAN Port" on P149 for the operation
steps.
3. Press the Utility button, select Config in the left menu.
4. Select Net Config in the bottom menu; the IP Config dialog will pop up.
5. Touch the byte to show the cursor, you can drag to select the numbers.
Select the number keys below in the dialog to change the value, the range
of each byte is 0～255. The range of Port is 0～65535. Touch to
delete current byte. Touch to complete the setting.
To change the date and time
1. Press the Utility button, select Config in the left menu.