User Manual

135
2. Select Time Config in the bottom menu; the Time Setting dialog will pop
up.
3. Touch the value that needs to be changed, a cursor will appear. You can
drag to select the numbers. Turn the G knob to change the selected
value. Touch OK to complete the setting.
To enable/disable VGA output
The VGA port could be connected to a computer monitor. The image of the
oscilloscope can be clearly displayed on the monitor.
3. Press the Utility button, select Config in the left menu.
4. Select VGA as ON or OFF in the bottom menu.
● Display
Press the Utility button and select Display in the left menu.
The description of Display Menu is shown as the follows:
● Calibrate
Press the Utility button and select Calibrate in the left menu.
The description of Calibrate Menu is shown as the follows:
Do Self-Calibration
The self-calibration procedure can improve the accuracy of the oscilloscope
under the ambient temperature to the greatest extent. If the change of the
ambient temperature is up to or exceeds 5℃, the self-calibration procedure
Function
Menu
Setting
Description
BackLight
0%~99%
Drag the slider or turn the G knob to
adjust the backlight.
Graticule
Select the grid type
Menu Display
5s~50s, Infinite
Set the disappear time of left and right
menu
Gesture
ON, OFF
Enable/disable the touchscreen controls
Function Menu
Description
Self Calibrate
Carry out the self-calibration procedure.
Factory Set
Call out the factory settings.
Touch Screen
Calibrate
Touchscreen accuracy calibration