User Manual

138
● System
Press the Utility button and select System in the left menu.
The description of System menu is shown as the follows:
How to Measure Automatically
Press the Measure button to display the menu for the settings of the
Automatic Measurements.
The oscilloscopes provide 22 parameters for auto measurement, including
Period, Freq, Mean, PK-PK, RMS, Max, Min, Vtop, Vbase, Vamp, Overshoot,
Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay ,
Delay , Delay , Delay .
The "Automatic Measurements" menu is described as the following table:
Function Menu
Setting
Description
Add
Type
Select type in the left menu
Source
①②③④
Select the source
Show all
Show all the measures on the screen
Add
Add the selected measure types (shown at
the left bottom, you could only add 8 types
at most)
Delete
Type
Select the type need to be deleted in the left
menu
Delete all
Delete all the measures
Delete
Delete the chosen measure type
Measure
Only if the waveform channel is in the ON state, the measurement can be
performed. The automatic measurement cannot be performed in the
following situation: 1) On the reference waveform. 2) On the Math waveform.
3) On the XY format. 4) On the Scan format.
Function Menu
Description
Help
Select a topic in Help catalog to view the help content. To exit the
Help window, touch in the top right corner or just press the
panel buttons.
About
Show the series number and version
Update
Place the software upgrade in the root of the U disk; insert the U
disk into the "USB Host port" in Bild 0-2 . Then select this menu
item to update.