User Manual

139
Measure the frequency, the period of the Channel CH1 and the mean, the
PK-PK of the Channel CH2, following below steps:
1. Press the Measure button.
2. Select Add in the bottom menu.
3. Select Source in the right menu; select ① in the left menu.
4. Select Type in the right menu; select Period in the left menu.
5. Select Add in the right menu, the period options added completes.
6. Select Freq in the left menu.
7. Select Add in the right menu, the frequency added completes, finish
setting of CH1.
8. Select Source in the right menu; select ② in the left menu.
9. Select Type in the right menu; select Mean in the left menu.
10. Select Add in the right menu, the Mean added completes.
11. Select PK-PK in the left menu.
12. Select Add in the right menu, the PK-PK added completes, finish setting
of CH2.
The measured value will be displayed at the bottom left of the screen
automatically (see Figure 0-7).
Figure 0-7 automatic measurement
The automatic measurement of voltage parameters
The Touchscreen series oscilloscopes provide automatic voltage
measurements including PK-PK, Max, Min, Mean, Vamp, RMS, Vtop, Vbase,
Overshoot and Preshoot. Bild 0-7 below shows a pulse with some of the
voltage measurement points.