User Manual

147
Function Items
Setting
Acquisition Mode
Current
Vertical Coupling
DC
Vertical Scale
Adjust to the proper division.
Bandwidth
Full
Horizontal Level
Middle
Horizontal Sale
Adjust to the proper division
Trigger Type
Adjust to the proper type
Trigger Source
Show the minimum number of channels.
Trigger Coupling
DC
Trigger Slope
Current
Trigger Level
Mid-point Setting
Trigger Mode
Auto
Display Format
YT
Run/Stop: Enable or disable sampling on input signals.
Notice: When there is no sampling at STOP state, the vertical
division and the horizontal time base of the waveform still can be
adjusted within a certain range, in other words, the signal can be
expanded in the horizontal or vertical direction.
Single: Press this button you can set the trigger mode as single directly,
so when trigger occurs, acquire one waveform then stop.
Copy: You can save the image, waveform data or setup file by just
pressing the Copy button. After you have defined the save
parameters with the Save menu, you can save files with a single
push of the Copy button. For more details, please see "To save
with Copy button push" on P133.