Datasheet

3.Quick User Guidebook
10
the waveform of the CH1 channel.
32. It is cursor measure window, showing the absolute values and the readings of the
cursors.
33. The blue pointer indicates the grounding datum point (zero point position) of the
waveform of the CH1 channel.
34. The yellow pointer indicates the grounding datum point (zero point position) of
the waveform of the CH1 channel.
How to Implement the General Inspection
After you get a new oscilloscope, it is recommended that you should make a check on
the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has
suffered serious damage, do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the "Appendix A: Enclosure" of
this Manual. You can check whether there is any loss of accessories with reference to
this description. If it is found that there is any accessory lost or damaged, please get in
touch with the distributor of PeakTech responsible for this service or the PeakTech
local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument can not work normally, or fails in the performance test, please get in touch
with the PeakTech distributor responsible for this business or the PeakTech
local offices. If there is damage to the instrument caused by the transportation, please
keep the package. With the transportation department or the PeakTech
distributor responsible for this business informed about it, a repairing or
replacement of the instrument will be arranged by the PeakTech.
How to Implement the Function Inspection
Make a fast function check to verify the normal operation of the instrument, according
to the following steps:
1. Connect the power cord to a power source. Long press the button on the
bottom left of the instrument.
The instrument carries out all self-check items and shows the Boot Logo. Push the
Utility button, select Function in the bottom menu. Select Adjust in the left menu,