Datasheet

11.Technical Specifications
Trigger:
Leistungsmerkmale
Bemerkungen
Trigger Level Range
Internalal
±5 div from screen center
EXT
±2 V
EXT/5
±10 V
Trigger Level Accuracy
(typical)
Internal
±0.3div
EXT
± (10mV + 6% des Set Value)
EXT/5
± (50mV + 6% des Set Value)
Trigger displacement
According to Record length and time base
Trigger Holdoff Range
100ns~10s
50% level setting
(typical)
Input signal frequency ≥50Hz
Edge Trigger
Slope
Rising, Falling
Pulse Trigger
Trigger condition
Positive pulse：＞, ＜, ＝
Negative pulse：＞, ＜, ＝
Puls Width-Range
30ns～10s
Video Trigger
Modulation
Support standard NTSC, PAL and SECAM systems
Line Number Range
1-525 (NTSC) und 1-625 (PAL/SECAM)
Slope Trigger
Trigger Condition
Positive pulse：＞, ＜, ＝
Negative pulse：＞, ＜, ＝
Time Setting
30ns～10s
Runt Trigger
Polarity
Positive, Negative
Trigger Condition
>, =, <
Pule Width-Range
30ns～10s
Windows Trigger
Polarity
Positive, Negative
Trigger position
Enter, Exit, Time
Windows Time
30ns～10s
Timeout Trigger
Polarity
Positive, Negative
Idle Time
30ns～10s
Nth Edge Trigger
Edge type
Rising, Falling
Idle Time
30ns～10s
Edge number
1 bis 128
Logic Trigger
Logic Mode
AND, OR, XNOR, XOR
Input Mode
H,L, X, Rising, Falling
Output Mode
Goes True, Goes False, Is True >,
Is True <, Is True =
SPI Trigger
Trigger conditions
Timeout
Timeout Value
30 ns to 10 s
Data Bits
4 bit to 32 bit
Data Line Setting
H, L, X
I2C Trigger
Trigger conditions
Start, Restart, Stop, ACK Lost, Address,
Data, Addr/Data
Address Bits
7 bit, 8 bit, 10 bit
Address Range
0 to 127, 0 to 255, 0 to 1023
Byte Length
1 to 5
RS-232 Trigger
Polarity
Normal, Inverted
Trigger Condition
Start, Error, Check Error, Data
Baud Rate
Common, Custom
Data Bits
5 bit, 6 bit, 7 bit, 8 bit
CAN Trigger
Signal Type
CAN_H, CAN_L, TX, RX
Trigger Condition
Start of Frame, Type of Frame, Identifier, Data, ID & Data, End of
Frame, Missing Ack, Bit Stuffing Error
Baud Rate
Common, Custom
Sample Point
5% to 95%
Frame Type
Data, Remote, Error, Overload