Datasheet

11.Technical Specifications
114
11.
Technical Specifications
Unless otherwise specified, the technical specifications applied are for Oscill. series
only, and Probes attenuation set as 10X. Only if the oscilloscope fulfills the following
two conditions at first, these specification standards can be reached.
 This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
 If change of the operating temperature is up to or exceeds 5℃, do a
"Self-calibration" procedure (see "How to Implement Self-calibration" on P14).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Performance Characteristics
Instruction
Bandwidth
P 1360
100 MHz
Upcoming
200 MHz
Upcoming
300 MHz
Vertical Resolution (A/D)
P 1360
12 bits
Upcoming
8 bits
12 bits
8 bits
8 bits
Channel
2 + 1 (External)
Waveform Refresh Rate
75,000 wfms/s
Acquisition
Mode
Normal, Peak detect, Averaging
Sample rate
(real time)
Dual CH 500 MS/s
Single CH
8 bits
mode
1 GS/s
12 bits
mode
500 MS/s
P 1360
Dual CH
500 MS/s
Single CH
1 GS/s
Upcoming
Dual CH
1 GS/s
Single CH
2 GS/s
Upcoming
Dual CH
1.6 GS/s
Single CH
3.2 GS/s
Input
Input coupling
DC, AC , Ground
1 MΩ±2%, in parallel with
15 pF±5 pF
Upcoming
1 MΩ±2%, in parallel with
15 pF±5 pF
；
50Ω ± 2%
Input coupling 0.001X - 1000X, step by 1 – 2 - 5
Upcoming
Upcoming
Upcoming
P 1360
P1360
Input Impedance