Datasheet

4.Advanced User Guidebook
64
● LAN Set
Using the LAN port or Wi-Fi, the oscilloscope can be connected with a computer. The
oscilloscope also supports communications with Android based smart device via
Wi-Fi. Refer to "Communication with PC" on P89 and "Communication with Android
Device via Wi-Fi (Optional)" on P97for the operation steps.
How to Measure Automatically
Push the Measure button to display the menu for the settings of the Automatic
Measurements. At most 8 types of measurements could be displayed on the bottom
left of the screen.
The oscilloscopes provide 30 parameters for auto measurement, including Period,
Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot,
Preshoot, Rise Time, Fall Time, +PulseWidth, -PulseWidth, +Duty Cycle, -Duty
Cycle, Delay A→B , Delay A→B
,
Cycle RMS, Cursor RMS, Screen Duty,
Phase, +PulseCount, -PulseCount, RiseEdgeCnt, FallEdgeCnt, Area, and Cycle
Area.
The "Automatic Measurements" menu is described as the following table:
Function Menu
Setting
Description
Add
Meas Type
(left menu)
Select the measure types
Source
CH1
Select the source
CH2
Add
Add the selected measure types (shown
at the left bottom, you could only add 8
types at most)
Remove
Meas Type
(left menu)
Select the types need to be deleted.
Remove Remove the chosen measure type
Remove All
Remove all the measures
Show
CH1
ON
OFF
Show all the measures of CH1 on the screen
Hide the window of CH1 measures
Show
CH2
ON
OFF
Show all the measures of CH2 on the screen
Hide the window of CH2 measures
Measure
Only if the waveform channel is in the ON state, the measurement can be performed.
The automatic measurement can not be performed in the following situation: 1) On
the saved waveform. 2) On the Dual Wfm Math waveform. 3) On the Video trigger
mode.
On the Scan format, period and frequency can not be measured.