Datasheet

11.Technical Specifications
11. Technical Specifications
Unless otherwise specified, the technical specifications applied are for XDS3000 four-channel series only, and
Probes attenuation set as 10X. Only if the oscilloscope fulfills the following two conditions at first, these
specification standards can be reached. Das Gerät sollte bei 30 Minuten lang ununterbrochen laufen.
 This instrument should run for at least 30 minutes continuously under the specified operating temperature.
 If change of the operating temperature is up to or exceeds 5℃, do a "Self-calibration" procedure (see "How to
Implement Self-calibration" on P14).
All specification standards can be fulfilled, except one(s) marked with the word "Typical".
Specifiactions
instructions
Bandwidth
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
60 MHz
100 MHz
60 MHz
60 MHz
100 MHz
200 MHz
300 MHz
60 MHz
100 MHz
Channels
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
4 CH
4 CH
2 CH
2 CH
2 CH
2 CH
2 CH
4 CH
4 CH
Vertical Resolution (A/D)
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
8 bit
8 bit
12 bit
12 bit
12 bit
8 bit
8 bit
8 bit
8 bit
Aquire
Mode
Normal, Peak Detect, Averages
Waveform Saple Rate
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
45,000 wfms/s
45,000 wfms/s
75,000 wfms/s
75,000 wfms/s
75,000 wfms/s
75,000 wfms/s
75,000 wfms/s
45,000 wfms/s
45,000 wfms/s