Datasheet

3.Quick User Guidebook
Control Area 2 CH
Figure 3-4 Control Area Overview
1. Function button area: Total 11 buttons
2. Waveform generator controls (depending on model)
or
DAQ: Data Acquire, P/F: Pass/Fail, W.REC: Waveform Record
3. Trigger control area with 2 buttons and 1 knob.
The Trigger Level knob is to adjust trigger voltage. Other 2 buttons refer to trigger
system setting.
4. Horizontal control area with 1 button and 2 knobs.
"HOR" button refer to horizontal system setting menu, "Horizontal Position" knob
control trigger position, " Horizontal Scale" control time base.
5. Vertical control area with 3 buttons and 4 knobs.
"CH1" and "CH2 " correspond to setting menu in CH1 and CH2, "Math" button refer
to math menu, the math menu consists of six kinds of operations, including CH1-CH2,
CH2-CH1, CH1+CH2, CH1*CH2, CH1/CH2 and FFT. Two "Vertical Position" knob
control the vertical position of CH1/CH2, and two "Scale" knob control voltage scale
of CH1, CH2.
6. Default: Call out the factory settings.
7. Print
8. Counter: Turn on/off the Counter.
9. DMM (optional) or Snapshot
10. Direction key: Move the cursor of the focused parameter.
11.M knob(Multipurpose knob): when a symbol appears in the menu, it indicates
you can turn the M knob to select the menu or set the value. You can push it to close
the menu on the left and right.
7